Disposal - Beurer BY 110 Mode D'emploi

The signal is weak, the
connection keeps failing or
there is interference�
If no transmission is possi-
ble, you have the option to
retune the device signals
digitally = pairing�
Set functions do not work
as desired�

12. Disposal

Batteries must be disposed of through specially designated collection box-
es, recycling points or electronics retailers� You are legally required to dispose
of the batteries�
For environmental reasons, do not dispose of the device in the
household waste at the end of its useful life�
Dispose of the device at a suitable local collection or recycling point
in your country� Dispose of the device in accordance with EC Direc-
tive – WEEE (Waste Electrical and Electronic Equipment)�
If you have any questions, please contact the local authorities responsible
for waste disposal�
• If another technical device such as a micro-
wave is in the area between the camera and
the parent unit, remove the technical device
or switch it off�
• Check whether other factors, such as trees or
similar, are in the area between the camera and
the parent unit, and reposition the devices until
the parent unit signals a connection�
• Check whether the camera and parent unit
are within the maximum receiving range�
1� Switch on the camera and parent unit�
2� Delete the camera in the menu of the par-
ent unit and then set up the camera again as
described in the "Adding a camera" section�
Reset the device to factory state as described
"Resetting to factory settings"�
41