Useful Information About The Baby Monitor; Cleaning And Maintenance; Important - Beurer BY 110 Mode D'emploi

• Use the direction buttons (
• Confirm using the ( OK ) button�

8. Useful information about the baby monitor

• Operating the parent unit with the battery minimises electrosmog from
electrical and magnetic alternating fields�
• You can increase the range of the baby monitor by positioning the camera
as high up as possible near a door or window and ensuring that the bat-
tery is not too weak�
• Other radio waves may possibly interfere with the transmission of the baby
monitor� Therefore, do not position the baby monitor near devices such as
microwaves, WIFI, etc�
• The following additional factors can interfere with the baby monitor's trans-
mission or shorten its range: furniture, walls, houses, trees, environmental
factors (such as fog, rain)�

9. Cleaning and maintenance

The service life of the camera and the parent unit depend on careful handling�

IMPORTANT

• Remove the battery from the parent unit if the video baby monitor is not in
use for an extended period�
• You will obtain the maximum capacity from your battery if you run down
the battery at least every 6 months� To do this, disconnect the parent unit
from the mains and run the battery down through normal use� Afterwards,
fully charge the battery again�
• The maximum capacity of the battery can only be reached after it has been
charged multiple times and is dependent on several factors (battery state,
ambient temperature, type and frequency of charging, etc�)�
• Protect the camera and the parent unit from impacts, damp, dust, chem-
icals, drastic changes in temperature, electromagnetic fields and nearby
sources of heat (ovens, heaters)�
• Clean the camera/parent unit with a soft, dry cloth� Do not use any abra-
sive cleaning products�
) / ( ) to select the "YES" field�
39