Controls
Set the desired
level with
the controller.
05. PREPARING BEFORE OPERATION
Set an air clean filter to a dehumidifier
1. Remove the back cover.
2.
from the back cover.
3. To set the air clean filter to
the back cover:
Take the air cleaner filter out
of polyethylene bag, and put it
onto the back filter. Set the
air clean filter to the back
cover with the filter fitted into
the four catches in the cover.
Put the filter holder on the
back cover with the flat sur-
face of the holder up, and set
the holder to the four catches
in the cover.
To set the holder securely,
press its perimeter with fin-
gers.Then check the condi-
tion.
B - 4
All manuals and user guides at all-guides.com
Press "On/Off"
switch to start
the operation,
to stop, press the
switch again.
The power
indicator lights
up during
the operation.
Operating manual – Dehumidifier TTK 30 S
"Full" lamplights up
and the operation
stops automatically
when the water tank
is filled with water.
In case of improper setting conditions, you
cannot set the back cover to the unit.
Set the cover in position.
For easy installation, please install one side first, and
then the other side.
Make sure that the water tank is set properly
Your dehumidifier will not be operated when the wa-
ter tank is full of water or it is not set properly.