Installation - Alcad 912-US Serie Manuel D'installation Et Programmation

2.2 Description of US receivers
10- Infrared receiver
11- Program switch
12- Program indicator
13- Box to indicate the name of the satellite channel tuned
14- Infrared emitter
15- Right tuning indicator for satellite channel
16- Audio and video miniDIN connector for decoder (lift cover only when using)
17- Suppy connectors
18- Box to indicate output channel
19- Output channel PLL branching indicator
20- Output channel level indicator
21- F connector for RF input signal from previous receiver
22- F connector of RF output signal to next receiver or amplifier
23- Mass connection
24- F connector of satellite signal input from previous receiver or from
external LNB unit
25- F connector of satellite signal output to next receiver
26- Output voltage switch for external LNB unit
27- Long connection bridge (45.2mm)
28- Short connection bridge (41.5mm)
29- Supply cable (50mm)
30- List of technical characteristics
2.3 Description of the PA amplifier
31- Supply connectors
32- Operating indicator
33- Level regulator of the output signal
34- F-connector for input #1 from the receivers
35- F-connector for input #2 from the receivers
35- Mass connection
37- F-connector for the extension signal input
38- F-connector for output signal testing at -30 dB
38- Signal output F connector
40- Supply cable (50 mm)
41- 75Ω F loads
42- F-connectors
43- List of technical characteristics
3.

INSTALLATION

The diagrams included in the ANNEX show how to make the standard
assembly and connections.
Do not connect the supply between the different modules of the unit while
the supply is connected to the mains
Serie 912 - US ENG - 23