Inserting The Memory Card; External Power Supply - Velleman CAMCOLVC26N Mode D'emploi

CAMCOLVC26N

6.3 Inserting the Memory Card

Before switching on the camera, insert
an SD/SDHC memory card in the card
slot in order to save photos and
videos.
Switch off the camera and open as
described above.
Ensure that the lateral protection on
the card has not been activated. Insert
the card as shown. Push the memory
card into the slot until it clicks into
place.
To remove the card, push it again until
it is partly ejected.

6.4 External Power Supply

The camera can be operated using power from an external power supply.
Use a 6 VDC with at least 1.5 A.
Note
Rechargeable batteries cannot be recharged in the camera using an external
power supply.
6.5 Assembly with Strap
Use the securing strap supplied to attach the camera to a tree or another object.
Position the camera a desired and pull the loose end of the strap tight until
the camera is securely fixed.
To release the strap again, pull at the tab of the securing strap.
V. 01 – 20/09/2016 7 ©Velleman nv