Velleman CAMCOLVC26N Mode D'emploi page 12

CAMCOLVC26N
Default settings
Settings: No/Yes
Reset the camera to the default factory settings.
Auto switch
Settings: 3 min, 5 min, 10 min, off
Determine whether the camera should be automatically switched off when
not used for some time in test mode.
Switch on the camera again by pressing a random button.
Recording volume
Settings: Low, Normal, High
Select at which volume level audio recordings are to be recorded.
Playback volume
Settings: Low, Normal, High
Select at which volume level audio recordings are to be played back.
System
Settings: FW Update, FW Version
FW Update: If the memory card contains new firmware this can be installed
using this option. During the update, the respective status is displayed.
FW Version: Shows the firmware version installed on the camera.
Delete
Settings: Single, All
Select this option to delete files from the memory card.
Single: Delete individual files. Toggle between the files using the /
buttons.
All: Delete all files on your memory card.
7.4 Night Recording
During night recording, the IR LEDs at the front provide the light required
for taking photos.
The camera uses IR LEDs with a long wavelength to keep red light to a
minimum. The provided number of LEDs generate a high deflection angle,
thus allowing night recording at a distance of 3 to 15 m without
overexposing the object.
Reflecting objects can, however, also cause overexposure within this range.
Please not that night recording using the IR LEDs produces black and white
images.
V. 01 – 20/09/2016 12 ©Velleman nv