Velleman CAMCOLVC26N Mode D'emploi page 10

CAMCOLVC26N
Select whether photos or videos should be taken when motion is detected.
When in Photo + Video mode, the camera first takes a set number of photos
prior to recording a video.
Image size
Settings: 8M, 5M, 3M, 2M, 1M
Select the desired photo resolution. A higher resolution produces a
somewhat better quality but results in larger files requiring more space on
the memory card.
Video size
Settings: 720p (1080x720), WVGA (848x480), VGA (640x480) @ 30 fps
Select the desired video resolution. A higher resolution produces a
somewhat better quality but results in larger files requiring more space on
the memory card.
Videos are recorded in AVI format, which can be played back on most video
equipment.
Number
Settings: 1 photo, 2 photos, 3 photos
Select the number of photos to be taken in succession when the camera is
triggered in photo mode. Please also observe the parameter Interval (see
below).
Length of video
Settings: 10 sec, optional 1-60 sec and 3, 5 and 10 min
Specify the duration of a video when the camera is triggered automatically.
The recording period for videos is not limited in test mode.
Interval
Settings: 30 sec, optional from 5 sec to 60 min
Select the shortest period for the camera to wait before it reacts to the
successive triggering of the main sensor after an animal has first been
detected. The camera does not record any images or videos during the
selected intervals. This prevents the memory card from being filled with
unnecessary shots.
Time stamp
Settings: On/Off (only available in photo mode)
Select whether to display the date, time, temperature and moon phase on
each photo.
Timer
Settings: Off/On
Switch on the timer if the camera should only be active within a certain
time. Once activated, the start and end time can be set.
Example: If the start time is set to 18h35 and the end time set to 8h25, the
camera will be operational from 18h35 to 8h25 the following day. The
V. 01 – 20/09/2016 10 ©Velleman nv