Before The First Use - Princess 352718 Mode D'emploi

Instruction manual
• 2xAAA size batteries are required.
• Ensure batteries are inserted in the correct direction.
• When replacing, ensure both batteries are changed
simultaneously.
• Press the corresponding buttons as explained in the control panel
part to operate the fan.

BEFORE THE FIRST USE

Before starting operations in this section:
• Find a place where there is power supply nearby.
• Install the exhaust hose and adjust the window position well.
• Insert the power cord into a grounded AC220~240V/50Hz socket.
• Press the power button to turn on the air-conditioner.
• Check whether the exhaust hose has been mounted properly.
• Set the temperature range: 16°C-31°C.
• When using functions on cooling and dehumidifying, allow at least
3 minutes between powering off and powering on.
USING THE ON DEVICE BUTTONS
Auto mode
• According to the current room temperature, automatically select
the mode: cooling, dehumidifying or fan.
Room <23°C
temperature
Mode Heating
Set temperature 21°C
8
23°C-26°C >26°C
Dehumidify Cooling
23°C 25°C
Cooling operation
• Press the "Mode" button till the "Cool" icon appears.
• Press the + <Temperature up> or - <Temperature down> button
to select a desired room temperature.
• Allow around 5 minutes for the cooling to start.
• Press the "Fan speed" button to adjust airflow speed.
Dehumidifying operation
• Press the "Mode" button until the "Dehumidify" icon appears.
• The temperature will automatically be selected.
• The fan speed will automatically be selected.
Fan operation
• Press the "Mode" button till the "Fan" icon appears.
• Press the "Fan speed" button to adjust airflow speed.
Timer operation
Timer ON setting
• When the air-conditioner is OFF, press the "Timer" button and
select a desired ON time and adjust by using the <Temperature
up> and <Temperature down> buttons.
• The ON time can be adjusted to anytime in 0-24 hours.
Timer OFF setting
• When the air-conditioner is ON, press the "Timer" button and
select a desired OFF time and adjust by using the <Temperature
up> and <Temperature down> buttons.
• The OFF time can be adjusted to anytime in 0-24 hours.
Swing operation (oscillation mode)
• Press this button to start the oscillation mode, the louver will
swing continuously up and down. Press button again to stop the
operation.