Cleaning & Maintenance - Princess 352718 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Instruction manual
It may be useful to open the window while attaching the cloth.
Make sure to leave enough room in the corners so the cloth won't
get stuck in the window.
Open the window kit's zipper by about 50 centimeters.
Place the air conditioning hose in the opening of the cloth. After
that, close the zipper until the air condition hose is placed.
CLEANING MAINTENANCE
Before cleaning, disconnect the unit from any electric supply
outlet.
First clean the surface with a neutral detergent and wet cloth, and
then wipe it with a dry cloth.
Do not use gasoline or other chemicals to clean the unit.
Do not wash the unit directly.
10
Air filter
The air filter should be cleaned once every two weeks.
Open the air inlet grille and take off air filter.
Clean the air filter with neutral detergent in lukewarm 40°C water
and allow to dry (not in direct sunlight).
Re-install the air filter into the inlet grille.
TROUBLESHOOTING
Troubles
Possible Causes
The unit does not
Water full
start when pressing
indicator lamp
power button.
blinks and water
tank is full.
Room
temperature is
higher than the
setting
temperature.
(Electric heating
mode)
Room
temperature is
lower that the
setting
temperature.
(Cooling mode)
Suggested
Remedies
Drain the water
out of the water
tank.
Adjust the
temperature.

Publicité

Table des Matières
loading

Table des Matières