Connect To The Power Source; Power On/Off Your New Lcd Display - NEC E461 Manuel D'utilisation

Connect To The Power Source

The display should be installed close to an easily accessible power outlet.
Fully insert the prongs into the power outlet socket. A loose connection may
cause image degradation.
If there is power to the display, the front LED at the bottom of the display will
be either blue or red. A blue LED means the display is powered on. A red LED
means the display is in standby mode.

Power On/Off Your New LCD Display

Press the power key on the remote control or press the power button located
on the side of the display. The display will power on.
Power Key
Power
Video Comp PC/HDMI TV
or
English-11
6
5
4
3
2
1