Before You Start; Assembly - Mantis 3558 Manuel De L'utilisateur

BEFORE YOU START

• Remove packing materials and unpack all parts and
lay them on a flat, stable surface.
• Make sure the delivery contents are complete and free
of any damage. If you find that parts are missing or
show damage do not use the tiller/cultivator but contact
the Mantis customer service center at 1-800-366-6268
for assistance. Using an incomplete or damaged tiller/
cultivator represents a hazard to people and property.
• Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
TILLER/CULTIVATOR ASSEMBLY
NOTE: Take care of small parts that are
removed during assembly or when making
adjustments. Keep them secure to avoid loss.
1
• Attach the cable clips to the middle
handle bar
Make sure all handle knobs are properly tightened
before using the product.
2
• Secure the middle handle to the lower
handle using the first set of knobs, bolts,
and plastic washers. Tighten the knobs
on each side to ensure a secure fit.
Contact us at www.mantis.com
The tiller/cultivator and the packaging are not
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
The tiller/cultivator must be fully assembled before
operation! Do not use tiller/cultivator that is only partly
assembled or assembled with damaged parts! Follow
the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble
the product! Do not insert the battery before it is
completely assembled! Failure to comply could result
in accidental starting and serious personal injury.
3
• Connect the upper handle to the middle
handle using the second set of knobs, bolts
and plastic washers. Tighten the knobs on
each side to ensure a secure fit.
4
• Secure the cable inside the cable clips.
Asse m bly
9