Husqvarna HTC T6 Manuel De L'opérateur page 34

HTC DURATIQ
In order for the grinding pressure to be maximised, the weights shall be placed in position 1
and to be minimised in position 4, see page
If the machine feels heavy to operate, it may be due to the placing of the weights. Raise the
weights to position 2, position 3 or position 4 to relieve the grinding head. Ensure that the
weights are in the same position on both sides to prevent the risk of uneven grinding.
34
WARNING
Risk of crushing.
Risk for personal injury.
Ensure that the pin locks in the position wanted when adjusting
the weights. Ensure that there is no gap at the sides when the
weight is locked. Risk for the lock releasing.
TIP
If the machine is heavy to operate, it may be due to the placing
of the weights. Fold the weights up or back to unload the
grinding head.
33 and Technical Data.
Operation
D002998, 02.00