Safety; Symbols That Are Used; Safety Rules - Husqvarna HTC T6 Manuel De L'opérateur

HTC DURATIQ

2 Safety

This chapter includes the safety rules that must be observed when using HTC's machines.

2.1 Symbols that are used

The symbols below are used in this manual to show the need for extra care when using the
machine.

2.2 Safety rules

Users of machines from HTC have the ultimate responsibility for ensuring that everybody
who works with or in the vicinity of the equipment follow all applicable safety rules. Safety
measures must meet the requirements that apply for this type of equipment. Apart from the
standard rules that apply in the workplace, the recommendations in this manual shall also be
observed.
All work must be performed by trained personnel. Users of machines from HTC must have
read through the dedicated manual for the machine. Incorrect use of the equipment could
result in situations that could cause harm to the operator, the surroundings or the machine.
10
WARNING
This symbol means Warning! and indicates a risk of personal
injury or material damage.
If the warning is not observed, this could result in death or
serious personal injury.
NOTE
This symbol means Note! and indicates a risk of material
damage in the event of incorrect use.
TIP
This symbol means Tips! and indicates tips and advice on
effective use of the machine or ways of reducing wear and tear
to the machine.
Safety
D002998, 02.00