Troubleshooting - Work Men WMG3000I Mode D'emploi

9. TROUBLESHOOTING

If the engine do not start, please check
If any fuel in the tank
If engine switch is no?
If fuel valve is on?
If enough oil in the engine?
If spark from the spark plug
Warning
Be sure there is no spilled fuel
around the spark plug. Spilled fuel
may ignite.
If the fuel reaches carburetor
Y
N
Y
Y
Y
N
Replace plug
1) Remove the spark plug cap and clean
spark
3) Set the plug side electrode on the cylinder
4) Crank the engine, sparks should jump
1) Turn off the fuel valve and lossen the
Check the electrical
Turn the switch to on position
N
Turn on the valve
N
No spark
How to check:
any dirt from around the spark plug.
2) Remove the spark plug and install the
plug in the plug cap.
head to ground.
across the gap.
How to check :
drain screw.
2) Fuel should flow from the drain when
the fuel valve is turned on.
80
Add oil
Contac the authorized
dealer