Work Men WMG3000I Mode D'emploi page 68

Figure 3 – Removing the back covor
Figure 4- Unscrewing the oil cap
Step 3- Add Gasoline
WARNING: Gasoline and gas fumes are highly flammable.
•
Do not fill tank near an open flame.
• Do not overfill. Always check for fuel spills.
To ensure that the generator runs smoothly use only FRESH, UNLEADED GAS WITH
AN OCTANE RATING OF 87 OR HIGHER. To add gasoline:
1. Make sure the generator is on a level surface.
2. Unscrew gas cap and set aside (NOTE: the gas cap may be tight and hard to
unscrew).
3. Slowly add unleaded gasoline to the fuel tank. Be careful not to overfill. Please
refer to the chart in figure 6 to find the gas capacity of your generator model. The
fuel gauge on the top of the generator indicates how much gasoline is in the
generator gas tank. NOTE: Gas can expand. Do not fill the gas tank to the very
top.
4. Replace fuel cap and wipe up any spilled gasoline with a dry cloth.
68
Figure 5- Adding oil