Ega Master 79919 Manuel D'instructions page 31

When connecting the machine, pay attention that the valve trigger 1 (see fig. 3) is not
actuated.
Never connect any hydraulic hose under pressure (see safety instructions for prevention of
hazards caused by hydraulic).
First connect the machine and then connect the hydraulic supply.
Prior to starting the machine put the lever 3 (for rotation direction left and right) into the
correct position (see fig. 4).
For example, if you want to loosen a screw and the rotation direction is adjusted to a position
for screwing in, this can lead to violent uncontrolled movement of the hydraulic impact wrench.
Setting the rotation direction
The lever 3 (see fig. 4) is for setting the rotation direction.
Actuate this lever only when the hydraulic impact wrench is switched off.
Rotation direction right
STARTUP
Fig. 3
Rotation direction left
Fig. 4
31