Braun Smoothie2Go Instructions page 7

English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy the new Braun
product.
Please read instructions carefully and completely
before using the product.
Parts and Accessories (A)
1 Lid with drinking spout
2 Lid gasket
3 Cup
4 Blade gasket
5 Blade group (grey)
Max. capacity: 12 fl. oz. / 350 ml
Before Use
Clean all parts before using the product for the first
time – refer to «Care and Cleaning».
Assembly and Blending (B)
NOTE: The Smoothie2Go must only be operated
using its special blade group and for preparing
drinks and smoothies.
When preparing protein shakes using powder and
liquids only, use the pitcher.
Assembly
• Ensure that the blade gasket is positioned on the
inside rim of the blade group.
• Hold the blade group at the coupling from
underneath and place it upside down in the cup.
• Take the locking ring of your Braun Blender and
twist it tightly onto the cup (3) in a clockwise
motion until it can go no further.
Blending
NOTE: The Smoothie2Go works only in combination
with the Braun JB 7 jug blenders (type 4142, 4143,
4144).
To operate the blender, refer to the user instruction
of the appliance.
• Fill the cup (3) with ingredients. Ingredients
should be added in reverse order of the regular
pitcher – solids first, then liquids.
NOTE: Do not overfill! Never add ingredients past
the «Max» fill line.
• Carefully place the blade group including gasket
onto the cup.
• Take the locking ring of your Braun Blender and
twist it tightly onto the cup in a clockwise motion
until it can go no further.
• Turn the cup upside down, position the line on the
locking ring in front of you and push the cup down
until it is securely locked into place.
• Plug in the power cord.
• Turn the appliance on by pressing the On/Off
button.
• The On/Off button will illuminate indicating that
the appliance is ready for operation and all other
indicator lights will flash. To start operation select
a pre-programmed speed.
• When finished blending, pull the cup straight up to
remove from the base.
• Turn the cup upright and remove the blade
assembly by twisting it counterclockwise.
• To remove the blade group from the locking ring,
push with both thumbs from inside the ring until it
snaps out.
• To attach the lid to the cup, ensure the gasket (2)
is inside the rim of the lid (1) and twist clockwise.
Carefully close the drinking spout.
NOTE: The Smoothie2Go attachment must not be
used to blend hot foods or carbonated liquids.
Care and Cleaning (C)
• All parts are dishwasher-safe. Do not use the
sanitizing program. The sanitization cycle could
damage your product.
• Parts may also be washed with hot, soapy water.
Rinse and dry thoroughly.
• For an efficient clean of the lids and the blade,
remove the gaskets (2/4).
Both the design specifications and these user
instructions are subject to change without notice.
Do not dispose the product in household waste at
the end of its useful life.
7