Assembly & Installation; Features - Cannon UNI-TROLL 10 STX-TS Manuel De L'utilisateur

ASSEMBLY & INSTALLATION
3
2
6
1
7
4
5
DOWNRIGGER PARTS DESCRIPTION
1. Reel: This is used to spool the cable, available in lengths ranging from 150 to 400 feet.
2. Boom: This is used to extend the weight out from the body of the downrigger and has a pulley fixed to its end. Boom
lengths range from 24 to 53 inches.
3. Swivel Head: This relays the cable at the end of the boom to lower the weight.
4. Cable: This connects to the weight.
5. Mounting Base: This attaches to the boat, enabling you to place the downrigger where you choose.
6. Rod Holder: This holds your fishing rods while trolling and may also be used for storing rods.
7. Boom Clamps: These lock the boom sections together after the boom has been extended or retracted.*
* This diagram is for reference only and may differ from your actual downrigger.
cannondownriggers.com | 5
©2015 Johnson Outdoors Marine Electronics, Inc.