Grok Cocktail 10-8327 Mode D'emploi page 17

Maximum permitted height for the installation of the luminaire.
dmàx:...
The luminaire must only be connected to a socket with the same IP protection as the luminaire.
IPxx
Only use LED bulbs. Maximum power indicated.
LED
Luminaire not suitable for vehicle crossings.
ACCESSIBILITY RANGE:
The luminaire must only be installed outside of the indicated arm's length range (*).
Non-replaceable light sources. The entire luminaire must be replaced at the end of its life.
LED
Light sources not replaceable by the user. They can only be replaced by the manufacturer, its technical
LED
service or by a person with an equivalent qualification.
The wall bushings must be handled correctly to maintain the IP degree of protection.
Control device not included. The low voltage power supply and the secondary output must be classified
DRIVER
as one of these 3 types:
TYPE
- Primary insulation (PI) - Doule or reinforced insulation (DRI) - Secondary (SELV) output
Luminaire designed for a power feedthrough. Indicates the No. of luminaires that can be connected in
a line or maximum current allowed.
N:.../Imàx:...
Class II luminaire with functional earth connection.
Luminaire sensitive to electrostatic discharges (ESDs). Handle with the precautions to avoid them and
do not touch the LED without protection.
The luminaire must be separated by a minimum distance to guarantee its IPX3 degree of protection.
>20cm
IPX3
IPxx (IN)
Luminaire with two different IP degrees of protection at the top and bottom.
IPyy (OUT)
Domestic or private use, not suitable for public lighting.
Only for indoor use.
Only for outdoor use.