Listening To Cd (Mp3/Wma File); Switching To The Cd Player Mode - Eclipse CD3000 Manuel D'utilisation

Listening to CD (MP3/WMA file)

1
Press the [CD
The front panel opens.
If a disc has already been loaded, the
disc is ejected by pressing the [CD
button.
Insert a CD into the disc slot, label
2
side up.
The CD will immediately start playing.
ATTENTION
When a CD is already loaded, press the
[DISC] button to switch to the CD mode.
● Note ●
• When music data recorded in
the normal way (CD-DA) is
present on the same disc with
MP3/WMA music
normally recorded music data
will be played. To listen to the
MP3/WMA music files, press
the button [3] for more than one
second.
• When a non-MP3/WMA file is
played, "NO SUPPORT" will
appear.
• The optional
cannot be used to play MP3/
WMA files.
CAUTION
CD
[
Do not press the
being inserted. This could cause an injury
and damage to the front panel.
] button.
files, the
CD changer
]
button while CD is
How to operate the CD (MP3/WMA) player
Switching to the CD player
mode
First press the [DISC] button for less than one
second to switch to the disc mode. It is assumed
here that a CD has already been loaded into the
unit.
]
Press the [DISC] button for less
1
than one second to switch to the
CD player mode.
This starts CD play.
If an external CD changer and iPod is
connected, each additional press of
the [DISC] button will switch modes
from CD player
CD changer 2
A changer or player with no discs
loaded will be skipped.
ATTENTION
• Playback may be intermittent when there is
a scratch on a CD or when the recorded
side is dirty.
• Only two external CD changers may be
connected.
➔
CD changer 1
➔ ➔
iPod CD player.
IV
➔
19