Atlantic MARADJA Notice D'utilisation Et D'installation page 86

GB
11.1.2 - How do you modify the Comfort temperature ?
The heating indicator
than the displayed temperature
The black arrow moves along the consumption gauge, between the green level and the red in
accordance with the instruction required. The Comfort temperature recommended by Ademe is
19°C, this arrow indicates to you if your behaviour is within those recommendations or far from it.
11.1.3 - Limit the set Comfort temperature
You can limit the maximum comfort set temperature that is set to 28°C.
Note: you cannot set the comfort temperature higher than the maximum recorded Comfort
temperature. The «
displayed.

84
To modify the displayed
temperature, press on
the keys + or – .
Validate by pressing on
key .
Wait for at least 6 hours until the temperature stabilises.
To limit the maximum Comfort
temperature, press the
+ buttons until "Set Max Temp"
is displayed.
To modify the displayed
temperature, press the – button
until the required temperature,
then confirm by pressing the
button
User's manual
OK
OK
is displayed on the screen if the ambient temperature is lower
OK
and
OK
» pictogram and the maximum comfort set temperature are
Confort Temp
The temperature changes in
steps of 0.5°C and flashes.
Day
The new chosen temperature
is displayed.
Max temp setting
The maximum Comfort
temperature is
displayed.
Max temp setting
Hour