The Heating Modes - When Do You Use Them; Comfort Mode - Atlantic MARADJA Notice D'utilisation Et D'installation

GB
When it is still switched on for heating, a slight odour can appear. It corresponds to the
evacuation of any traces connected with the manufacture of the radiator and will disappear
after a few moments operating.
Pictogram

11.1 - Comfort mode

11.1.1 - Use the Comfort mode t
This mode enables you to have the required ambient temperature when you are in the
room. The consumption gauge lights will enable you to optimise your setting
To activate the Comfort
mode, press several
times on the movement
arrows left
Until the selection arrow
is on the Comfort mode
Validate by pressing on
the key
The recommended Comfort temperature is 19°C.
The Comfort mode goes from 12.5°C to 28°C. If you lower the Comfort temperature
below the Eco temperature, the Eco temperature falls by -0.5°C compared to the Comfort
temperature. On the other hand, if you increase the Comfort temperature, the Eco
temperature does not change.
User's manual
11 - HEATING MODES
Description
Comfort
Eco
Frost free
Comfort -1
Comfort -2
 
or right
.
When to use this mode
You are in the house.
Your are absent for 2 to 48 hours or you are sleeping.
You are absent more than 48h or it is summer. The Frost
free temperature is fixed at 7°C±3°C approximately and
cannot be modified.
These heating methods are accessible only in the
presence of an energy manager on your system.
OK
OK
Comfort ON
The selection arrow of mode

flashes above the mode
during selection.
Day
Only the pictogram remains
lighted: the setting is
validated.
Hour

83