Publicité
Les langues disponibles
Les langues disponibles
Toyota Previa
1990 - ....
Ref. 1088
Fitting instructions
1)
Remove the spare wheel and disassemble the rear bumper. Permanently remove the bumper supports
from the metal buffer beam.
2)
Position the tow bar with the points (B) in the metal buffer beam so that the points (B) fit into the
attachment points of the bumper supports. Affix the bolts and tighten firmly.
3)
Place the tow bar with the carrying arms in the chassis openings so that the points (A) fit into the
provided holes on the underside and side of the chassis. Place the washers at the outside of the chassis
and affix the bolts. Tighten everything firmly.
4)
Assemble (*) and tighten firmly. Replace the spare wheel.
Composition
1 tow bar reference 1088
1 ball T43L004
6 bolts M8x25 + nuts
10 bolts M12x40
4 bolts M12x40
6 washers 25x8,5x2
10 washers 40x12x4
6 security washers 8mm
14 security washers 12mm
1 security shackle (800053)
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(B)
(A)
(*)
(B)
(A)
(B)
(A-*)
(*)
Publicité
