Weston 05-0201 Mode D'emploi page 10

HANDLE MOUNTING INSTRUCTIONS
NOTE: The Apple & Fruit Crusher comes with the Handle already
mounted. Follow these instructions if the Handle should ever come
loose or to reinstall it after cleaning.
1. Loosen the Set Screw on the Handle with the provided Allen Wrench.
Note: It is not necessary to completely remove the Set Screw from the
Handle.
2. Slide the Handle onto the Shaft. Align the Handle Set Screw Hole
with the Shaft Set Screw Hole. FIGURE 14
3. Using the Allen Wrench, tighten the Set Screw to the Shaft. NOTE:
If the Handle slips on the Shaft while turning, the Set Screw is not
correctly aligned or tightened. Repeat steps 1-3 until the Handle is
secure.
CAUTION!
10
Shaft
To avoid personal injury, DO
NOT touch the stainless steel
Blades on the Wooden Drum.
Set Screw
FIGURE 14