Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
of the plug or connecting cable
must always be executed by the
manufacturer of the electric tool
or its customer service.
Allow the machine to
before all maintenance and
cleaning works. Danger of burn
injuries!
Cleaning
•
Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid acci-
dents.
•
Keep the gripping handles free of
petrol, oil or grease. Clean the grip-
ping handles, where appropriate, with
a moist cloth soaked in soap. Use no
solvents or petrol for cleaning!
Maintenance Interval Table
Machine part
Components of the
chain brake
Sprocket chain wheel
Saw chain (5)
Guide bar (4)
Oiling the saw chain
Clean and oil the chain regularly.
In this way, you keep the chain
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance of
the saw chain, the guarantee claim
is invalid.
136
cool down
Action
Check, replace if required
Check, replace if required
Check oil, regrind or re-
place if required
Check, turn round, clean
and oil
•
Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
•
Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
Maintenance intervals
Regularly carry out the maintenance oper-
ations listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Before every
use
Remove the power plug and use
cut-protection gloves when you are
handling the chain or the chain bar.
•
Oil the chain after cleaning, after 10
hours of use or at least once weekly,
depending on which comes first.
•
Before oiling, the chain bar must be
cleaned thoroughly, in particular the
After 10 hours
of operation
Publicité
Chapitres
Table des Matières
