Grizzly Tools EKS 2440 QT Traduction De La Notice D'utilisation Originale page 126

GB
non-skid safety shoes, hard hat, or
hearing protection used for appropria
te conditions will reduce personal inju-
ries.
Prevent unintentional starting. En-
c)
sure the switch is in the off-position
before connecting to power source
and/or battery pack, picking up or
carrying the tool. Carrying power
tools with your finger on the switch or
energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper foot-
e)
ing and balance at all times. This
enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewel-
lery or long hair can be caught in mov-
ing parts..
If devices are provided for the con-
g)
nection of dust extraction and col-
lection facilities, ensure these are
connected and properly used. Use
of dust collection can reduce dust-
related hazards.
h) Warning! During operation, this elec-
tric tool generates an electromagnetic
field which, under certain circumstanc-
es, may impair the functionality of
active or passive medical implants. To
reduce the risk of serious or lethal inju-
ries, we recommend that persons with
medical implants consult their doctor
and the manufacturer of their medical
implant before operating the machine.
126
i) Change your working position regu-
larly. Long use of the equipment can
result in vibration-related circulatory
disorders in the hands. However, the
length of use can be extended by us-
ing suitable gloves or taking regular
breaks. Note that a personal tendency
for poor circulation, low outdoor tem-
peratures, or high gripping forces dur-
ing work will reduce the length of use.
4) POWER TOOL USE AND CARE
Do not force the power tool. Use the
a)
correct power tool for your applica-
tion. The correct power tool will do
the job better and safer at the rate for
which it was
b) Do not use the power tool if the
switch does not turn it on and off.
. Any power tool that cannot be con-
trolled with the switch is dangerous
and must be
Disconnect the plug from the power
c)
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preven-
tive safety measures reduce the risk of
starting the power tool
Store idle power tools out of the
d)
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
designed.
repaired.
accidentaIly.