Maintenance And Cleaning; Cleaning; Maintenance Intervals; Maintenance Interval Table - Grizzly Tools EKS 2240 QTX Traduction De La Notice D'utilisation Originale

GB
Maintenance and

cleaning

Basically, carry out mainte-
nance and cleaning works with
switched-off motor and power
plug removed. Danger of injury!
Leave any maintenance and ser-
vicing work not covered by this
manual to our Service-Center.
Use only original spare parts.
Allow the machine to cool down
before all maintenance and
cleaning works. Danger of burn
injuries!
Cleaning
• Clean the machine thoroughly after
every use. In this way, you extend
the life of the machine and avoid ac-
cidents.

Maintenance Interval Table

Machine part
Components of the
chain brake
Sprocket chain wheel Check, replace if required
Saw chain
Guide bar
146
Action
Check, replace if required
Check oil, regrind or replace if
required
Check, turn round, clean and oil
• Keep the gripping handles free of gas,
oil or grease. Clean the gripping han-
dles, where appropriate, with a moist
cloth soaked in soap. Use no solvents
or gas for cleaning!
• Clean the saw chain after every use.
Use a paint brush or whisk for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning..

Maintenance intervals

Regularly carry out the maintenance oper-
ations listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Before
every use




After 10 hours
of operation
