General Safety Instructions For Power Tools - Grizzly Tools EKS 2440 QT Traduction De La Notice D'utilisation Originale

General safety instructions for
power tools
WARNING! Read all safety di-
rections and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Retain all safety directions and
instructions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated
power tools (with power cord) and to bat-
tery- operated power tools (without power
cord).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of flammable Iiquids, gas-
es or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Dis-
tractions can cause you to lose con-
trol.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and match-
ing outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or un-
plugging the power tool. Keep cord
away from heat, oil, sharp edges
or moving parts. Damaged or entan
opergled cords increase the risk of
electric shock.
e) When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use. Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a resid-
ual current device (RCD) protected
supply. Use of an RCD reduces the
risk of electric shock. Use a surge pro-
tector with a release current of 30 mA
or less.
3) PERSONAL SAFETY
a) Stay alert, watch what you are do-
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication. A moment of
inattention white operating power tools
may result in serious personal injury.
Use personal protective equipment.
b)
Always wear eye protection. Protec-
tive equipment such as dust mask,
GB
125