Safety Mode After Hot Water - Blanco EVOL-S Pro Hot & Filter Mode D'emploi

Operation

Safety mode after hot water

40
8 seconds after hot water has
last been dispensed, the system
switches to safety mode:
The LED display flashes red and
blue alternately for 5 minutes.
Water will not run if the sensor
is touched.
WARNING: The first 100 ml can be very hot.
We recommend letting the first 100 ml run into the sink unused.
The outer ring and LED display
glow alternately red and blue
for 3 seconds.
Blue LED lights up:
filter mode is on.
Filtered water can be run
as usual.