Bosch GPL100-30G Consignes D'utilisation/De Sécurité page 20

– Turn the measuring tool 180°, allow it to level in and mark the
centre point of the laser beam on the opposite wall B (point
II).
– Position the measuring tool – without rotating it – close to
wall B, switch it on and allow it to level in.
– Align the height of the measuring tool (using the tripod or by
placing objects underneath as required) so that the centre
point of the laser beam exactly hits the previously marked
point II on wall B.
GPL100-30G 50G 11-20.indd 20
A
180°
A
-20-
B
B
4/23/21 5:27 PM