Whirlpool HGL 44 A Manuel D'instructions page 23

MACHINE SWITCHED OFF : SCREEN OFF
When the machine is OFF, it shows "OFF", the date and time and possibly the icon in the
bottom left part, if the automatic switch-off timer is enabled (see page 8). Just the ON/OFF
button is lit. From OFF status, you can switch the machine on by pressing the ON/OFF
button for 2 seconds.
You can access the user menu and the technician's menu (after entering a password) by
pressing the M button for 3 seconds.
SWITCHING THE MACHINE ON
After inserting the filters and the overflow (if provided), press the ON/OFF button for 2
. Only for models N1300 Double, insert one empty basket in
seconds
order to activate the switch.
The dishwasher will switch on.
The initial logo will appear and an indication of the osmosis system (if installed and if
enabled in the user menu). Then the normal operating screen will appear.
If the tank or the boiler is empty, the machine will start to fill.
If there is a built-in osmosis system, its activation will be pointed out during the filling phase.
The automatic timer icon will appear (if enabled in the user menu).
The tank will continue to fill until the correct level is reached.
HEATING PHASE
Once full, the rinse and washing water will be heated.
The icon of the tank and of the boiler will be yellow; this means they are in the heating
phase.
Once the set temperatures have been reached, the icons will turn green.
This means the machine is ready to start a washing cycle.
LOADING THE DISHWASHER
Remove any solid leftovers from the plates (bones, peel, nuts etc); leave the plates to soak
in cold water if there are any stubborn leftovers, such as dried cheese, egg etc.
Put the glasses in the basket with their stem upwards.
Use the cutlery basket for cutlery. Put the cutlery loose in the basket, preferably with the
handle at the bottom. Be careful not to injure yourself on the fork prongs and knife blades.
CHOOSING AND STARTING A WASH PROGRAM
You can select the wash program using the + and - buttons.
The wash programs are the following:
P1: duration 80" – wash temperature 55° - rinse temperature 70°
P2: duration 120" – wash temperature 55° - rinse temperature 75°
P3: duration 180" – wash temperature 55° - rinse temperature 80°
P4: duration 480" – wash temperature 60° - rinse temperature 80°
OPTIONAL: Program for beer glasses (cold rinse) duration 130" – the cold rinse
temperature is established by the mains system.
Once you have selected the required program, you can press or close the hood to
start the wash cycle.
The button will turn blue and the display will show the countdown to the end of the
complete wash cycle. Wash cycle in progress screen page.
If the door/hood is opened while the washing cycle is in progress, it will stop to start again
when the door/hood is closed again, if this is done within 20 seconds, otherwise, after 20
seconds, the cycle will reset. Program P4 can be used to finish with the rinse cycle, by
pressing the button again (blue) during the wash phase.
EXTENDING THE WASH PHASE: THERMOSTOP (CAN BE ACTIVATED FROM THE
TECHNICIAN'S MENU)
If the wash time ends and the rinse phase has still not reached the set temperature, the
wash cycle is extended until the set rinse temperature is reached.
Display of the thermostop function enabled.
23