Mi-T-M Corporation GEN-6000-0MKD Manuel De L'opérateur page 20

Check fuel
Check engine oil
Check for loose or lost nuts and bolts
Check for leaks
Check cylinder and head fins for
dust and dirt
Check fuel lines (replace if necessary)
Clean air cleaner foam element (**)
Tighten nuts and bolts (*)
Change engine oil (*)
Clean fuel filter
Replace air cleaner paper element (**)
Clean dust and dirt from
cylinder and cylinder head fins (**)
Add fuel stabilizer
Run unit dry
* Perform these operations after the first 5 hours of use, then at the recommended intervals.
** Service more frequently under dusty conditions.
NOTE: These items must be performed with the proper tools. See your Mi-T-M Customer Service Repre-
sentative for service, unless you have the proper equipment and mechanical proficiency.
20
Service
Daily Every
25hrs.
•
•
•
•
•
•
•
Every Every
100 hrs. 200 hrs.
•
•
•
•
•
Before
Storage
•
•
Operator's Manual