Battery Installation - Mi-T-M Corporation GEN-6000-0MKD Manuel De L'opérateur

tions are suitable for use in this engine: ASTM D-975 - 1D
or 2D, EN590, or equivalent.
FUELS FOR LOW TEMPERATURES
It is possible to run the engine at temperatures below 0°C
using special winter fuels. These fuels reduce the forma-
tion of paraffin in diesel at low temperatures. If paraffin
forms in the diesel, the fuel filter becomes blocked inter-
rupting the flow of fuel.
Summer up to........... 0°C (32°F)
Winter up to........... -10°C (14°F)
Alpine up to............ -20°C (-4°F)
Arctic up to.......... -30°C (-22°F)
REFUELING
WARNING: DO NOT OVERFILL FUEL TANK.
LEAVE ROOM FOR FUEL TO EXPAND. CLEAN
UP ANY SPILLAGE THAT OCCURS DURING
REFUELING.
14
Preparing the Generator
1. Remove fuel tank cap.
2. Add fuel and reinstall fuel tank cap.
WARNING:
TEMPERATURES
ADDITIVES TO DIESEL FUEL, TO AVOID
PARAFFIN CRYSTALS SOLIDIFICATION.
BIO-DIESEL FUELS
Fuels containing less than 20% methyl ester or B20 are
suitable for use in this engine. Biodiesel fuels meeting
the specification of BQ-9000, EN 14214 or equivalent are
recommended. DO NOT use vegetable oil as a biofuel
for this engine. Any failures resulting from the use of fuels
other than recommended will not be warranted.

BATTERY INSTALLATION

WARNING: SHOULD ONLY BE DONE BY AN
AUTHORIZED DEALER.
WITH LOW AMBIENT
(-5/8°C) ADD SPECIFIC
Operator's Manual