Honeywell VisionPRO Serie Mode D'emploi page 14

Masquer les pouces Voir aussi pour VisionPRO Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Adjusting dehumidification settings: commercial use
This feature can control a dehumidifier
or use your air conditioner to reduce
humidity.
1 Touch
MENU
and select Dehumidification.
2 Select Auto.
3 Touch
or
s
t
4 Touch
Done
to save your settings. Touch
Cancel
to ignore changes.
If your air conditioner is used to control
humidity, the thermostat may use the
following methods to maintain humidity:
• Cool from 1° to 5° F lower than your
temperature setting.
• Run cooling for the minimum "on"
time to reduce humidity.
• Run cooling and heating at the same
time to reduce humidity without
lowering the temperature.
Adjusting ventilation settings
1 Touch MENU, and select Ventilation.
2 Select Mode,
Temporary
then select appropriate options. (For
options, see next page.)
3 Touch
Done
to save your settings.
Touch
Cancel
to ignore changes.
69-2761EFS—03
to select humidity level.
Boost, or Lockout,
12
Dehumidification
Equipment Status
Dehumidification
Off
Auto
Ventilation
Equipment Status
Mode
Temporary Boost
MCR34100
MCR34130
MCR34131
MCR34100
MCR34132
MCR34133
MCR34134

Publicité

Table des Matières
loading

Table des Matières