Honeywell VisionPRO Serie Mode D'emploi page 20

Using the temperature display
In some circumstances, the temperature
displayed on the Home screen may
not match the temperature near the
thermostat. If your system is set up to
use remote indoor sensors, it may be
reading a sensor in another location.
Using the humidity display
In some circumstances, the humidity
displayed on the Home screen may not
match humidity near the thermostat.
Some systems are set up to use two
sensors, one to control humidification,
the other for dehumidification. These
sensors are often installed in different
locations.
Depending on how your thermostat was
installed, the thermostat Home screen
will display humidity readings from only
one sensor.
69-2761EFS—03
Temperature
reading depends on
location of sensor
Humidity reading
depends on location
of sensor.
18
MCR33985
MCR34163