Tripp-Lite PDUMV40 Manuel Du Propriétaire page 3

Installation
STEP 4: Attach equipment to the PDU. Do not exceed the
load rating for each circuit; distribute equipment appropriately
between the two circuits to obtain the maximum utility from the
PDU. The total electrical current used by each circuit will be
displayed on the corresponding digital meter in amperes. The
meter labels are color-coded to match the circuits.
STEP 5: Optional Installation. The PDU includes two adapters
that convert the L5-20P input plugs to 5-20P input plugs. Use
both adapters, a single adapter or neither of the adapters. The
adapters are optional; the PDU will work properly without
connecting the adapters. The adapters are not color-coded.
Features
1
1
NEMA L5-20P Input Plugs: The input plugs and associated power cords are
color-coded to correspond with each of the independent power circuits.
2
NEMA 5-20P Plug Adapters: The adapters convert the input plugs from NEMA
L5-20P to NEMA 5-20P . The adapters are not color-coded.
3
Circuit Breakers: If the current drawn by the equipment connected to the corresponding
independent power circuit exceeds that circuit's Maximum Load Rating, a circuit breaker will
trip to prevent possible damage. When a circuit breaker trips, its plunger will pop up.
Disconnect excess equipment from the affected circuit and allow the breaker to cool one
minute before depressing the plunger to reset the breaker. The circuit breakers are color-
coded to correspond with each of the independent power circuits.
4
NEMA 5-15/20R Outlets: The outlets are color-coded to correspond with each of the
independent power circuits.
5
Ammeters: The total electrical current used by each circuit will be displayed on the
corresponding digital meter in amperes. The meter labels are color-coded to match the
circuits.
14-02-337-932783.indd 3
2 3
Step 4
Step 5
4
3
5
3/26/2014 1:28:10 PM