To Start And Stop; To Empty The Collection Box; Tips - Zipper ZI-GHAS2800 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14.4

To start and stop

1.
Mount the collection box ①;
2.
Pull the lock button ② totally upward
3.
Plug the power supply ③;
4.
Push the green button "1" to start the shredder;
5.
Start to work;
6.
Push the red button"0" to stop the shredder.
14.5

To empty the collection box

1.
Push the red button"0" to stop the shredder;
2.
Press down the lock button②;
3.
Remove the collection box from the undercarriage.①.
14.6

Tips

Always wait for the rest of the chaff, before turning it on again.
Longer material that protrudes out of the machine could turn out if it is confiscated by
the chopper blades
1. Longer material that protrudes out of the machine could turn out if it is confiscated by
chopping!
2. Keep at a safe distance!
3. Caution! Always use the slide when you try to push the material into the feed tube. Make
this never directly with your hands! Insert the slide after use back to its original position.
4. Heavy material or branches lead to blocking of the chopper blade when they are chopped
through.
5. Fill out the material to be chopped from the right corner of the hopper a forth.
6. Examine the material to be chopped carefully. Make sure that it is not in contact with
stones or nails, as these could damage the shredder heavy.
7. Check for signs of vibration. Strong vibrations caused by damaged or worn blades. Replace
the blade if necessary.
Large objects or pieces of wood may be removed by the material removed is changed and
the same between the cutting and release direction of the chopper blade.
Perform only so much material that the feed tube is not clogged.
You chopping garden waste that has been stored for several days and are wilted and
moist, alternating with tree branches.
This avoids that the chopping blades is blocked.
Do not put soft material such as kitchen scraps into the chopper, but compost it.
Widespread material with leaves must first be completely shredded before new material is
introduced.
Make sure that the shredded material is free to fall out of the chute – there is the risk of
back!
The ventilation slots must not be covered by the collector or chopped
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at
ZI-GHAS2800
A T T E N T I O N
OPERATION
Seite27

Publicité

Table des Matières
loading

Table des Matières