Residual Risks; Assembly - Zipper ZI-GHAS2800 Manuel D'utilisation

 Work. Using your chopper only in places where it is protected from water Use it in the rain
never outdoors.
 Store it in a dry and safe place out of reach of children.
Caution! Always wear safety glasses, hearing protection, gloves and sturdy work clothes!
We recommend the use of a headgear.
12.3

Residual Risks

Also in compliance with all safety regulations and when used following residual risks are
considered:
 Risk of injury to the hands / fingers when you grab during the operation with his hands in
the hole on the blade unit.
 Risk of injury to the hands / fingers during assembly and cleaning the blade unit.
 Risk of injury due flying away chopped in the funnel.
 Working without hearing protection can cause hearing damage over time.
 Electrical hazard, using improper electrical connection cables.
 Through compliance with all safety regulations such hazards can be reduced to a minimum!
13

ASSEMBLY

1. Turn the shredder upside down and
pivot the legs up ward (Fig. 1A)
2. Place the supplied wheel axle (A)
through the respective openings
(Fig. 1A)
3. Put the supplied washer (B) and sleeve
(C) onto the wheel axle (Fig. 1B)
4. Place the wheels (D) and install nut
hand tight (E). (Fig.1C)
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at
ZI-GHAS2800
ASSEMBLY
Seite23