Zipper ZI-GHAS2800 Manuel D'utilisation page 23

5. Using the supplied wrench (F) to fix
the wheel axle and at the same time
firmly lock the nut by using the
wrench (G). (Fig.1D)
6. Place the wheel cover (H) in the center
of the wheel.(Fig.1E)
Mount collection box
1. Press down the lock button(A) and then
insert the collection box into the undercar-
riage.(Fig.2)
2. Press the lock button (A) totally upward!
Remove collection box
1. Switch off and disconnect the machine
from the power supply.
2. Press down the lock button (A) (Fig.2).
3. Remove the collection box from the under-
carriage.
ANY FINAL JAM NUT AND BOLT ON ANY DEAD TIGHT!
WHILE OPERATING THE VIBRATING MACHINE NOT TIGHTEN THE SCREWS
CAN BREAK OFF AND LOST AND DANGEROUS SITUATION TO BE
Z.I.P.P.E.R Maschinen GmbH  www.Zipper-maschinen.at
ZI-GHAS2800
A T T E N T I O N
ASSEMBLY
CARRIED!
Seite24