Bertazzoni KIN 30 PER X Livret D'instructions page 13

pliance by unplugging it or using the main switch. The manufacturer disclaims
all liability for any damage that may be directly or indirectly caused to people,
things and animals due to the failure to follow all the instructions provided in
this booklet and above all the warnings relating to the installation, operation
and maintenance of the appliance.
N
WARRANTY
The new equipment is covered by warranty.
The warranty conditions are provided by the distributor.
The manufacturer is not liable for any inaccuracies in this booklet resulting
from printing or transcription errors. The manufacturer reserves the right to
modify its products as it considers necessary or in the interests of the user,
without compromising their essential safety and operating characteristics.
O
ASSEMBLY INSTRUCTIONS
Step 1
- Remove the bottom panel (see point H1).
Step 2
- Remove the metal filters.
Step 3
- Screw off the 6 screws (A) and remove the bottom part.
Step 4
- Insert the hood into the forniture hole and fix the hood using 8 screws for
wood (B).
Step 5
- Before making the electrical connections disconnect the power supply.
- Re-assembly the parts starting from step 1, 2, 3.
- Check the correct position of the bottom panel.
(fig. O)
11