Connecting The Control Unit To The Caddy - Polaris 9400 Sport 4WD Manuel Du Propriétaire

8. Align cleaner hook pins with holes in the handle
tube and snap into place (Figure 7).
Figure 7. Snap Cleaner hook into Place
Figure 8. Fully Assembled Transport Caddy
3.3 Connecting the Control Unit to the
Caddy
1. Align the bottom of the control unit with the
notch at bottom of the control unit hook on the
caddy (Figure 9).
Figure 9. Align Control Unit on Caddy hook
2. Press control unit onto the caddy hook until it
snaps and locks into position (Figure 10).
Figure 10. Attach the Control Unit onto Caddy
Page 7