Equipment Description - Saci CEE625S26/60 Manuel De Fonctionnement Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. GENERAL INFORMATION.
Before the installment read this manual thoroughly for it contains basic instructions that facilitate
knowing the pressure equipment and thus being able to maximize the advantages of use. If the
indications mentioned above are fulfilled, the equipment's components will have a long life and dangers will be
avoided. It is essential that this manual is kept always available with the equipment.
Both the installation and the functioning must fulfill the safety rules of the country where the product is installed. The installment
and/or maintenance will be carried out with maximum care and exclusively with qualified personnel (paragraph 6.1) that possess
the demanded requirements present in the current regulations. By not accomplishing the safety regulations, in addition to damaging
the equipment and exposing the personnel to high risk, will cause the loss of all warranty rights.

1.1 Equipment Description:

Example:
Equipment field. (CEE = 2 main electric)
Equipment's pump model (ex.: KDN 65-200)
Main turbine pumps diameter (ex.: 260 mm.)
Main pumps engine power (C.V.).
2. APPLICATIONS.
The SACI PUMPS Fire fighting equipment, are designed to provide the best solution for water pressure in an installation of fire
protection, and therefore are particularly suitable for many different facilities such as: public and private buildings, hypermarket,
shops, factories etc. Our line of equipment shown here has been studied to ensure a durable and reliable operation even under the
most extreme conditions in which such applications are quite common.
3. PUMPED LIQUIDS.
These equipments are designed and manufactured for pumping clean, pure and aggressive liquids on the condition
of tested compatibility with the same manufactured materials and that the power of the installed engine is
adequate to the specific weight and viscosity of the transferred fluids.
4. TECHNICAL INFORMATION AND USE LIMITATIONS.
PUMPS
Liquid field temperature:
Rotation speed:
Volume:
Lifting height:
Maximum surrounding temperature:
Storage temperature:
Relative air moisture:
USE AND MAINTENANCE MANUAL
From -10ºC to +100ºC (depending on pumps and accumulators)
2.900 r.p.m.
From 12 m
3
/h to 1000 m
3
/h depending on model.
Up to 150 m.c.a.
+ 50ºC
-10ºC +40ºC
max 95%
14
CEE
625
S 26 /
60

Publicité

Table des Matières
loading

Table des Matières