EB TECHNOLOGY START-S6XL BLOCK Notice D'emploi page 44

START-S6XL BLOCK
1
9
>
TIMES
9 a
10
>
TIMES
SLOW DOWN
>
11
TIMES
11 a
* After the fi rst push of the TIMES button you can use the START command from the clamp no.17 or from
the learned remote control
8.3 Time learning PEDESTRIAN WAY
1
TIMES
2
TIMES
3
TIMES
4
TIMES
4 a
Push the TIMES button (or START)
2
(if the closing limit switch of motor
no.2 is not available)
... if the limit switch is available
wait until motor no. 2 stops
Push the TIMES button (or START)
2
1
...if the slowing down is activated
(trimmer see Slow down)...
Push the button TIMES (or START)
1 2
... if the closing limit switches of motor
no.1 is not available...
... if the limit switches is available
wait the stop of motor no.1
The gate is in closed position
Press and keep pressed the TIMES button till the
control board starts motor no. 1 in OPEN,
then release the TIMES button
Press the TIMES button
Let the desired pause time run for the PEDESTRIAN OPENING
Press the TIMES button
Push the button TIMES (if the closing limit switches
of motor no.1 is not available)
... If the limit switch is available wait until the
motor no.1 (pedestrian use) stops in its closing
-20-
Technical manual
The second motor stops,
the fi rst motor CLOSES
The 2° motor stops,
the 1°motor CLOSES
The motor no.1 slows down
when closing
Motor no.1 stops. End of
ADVANCED LEARNING TIME
Motor no.1 stops. End of
ADVANCED LEARNING TIME.
Motor no.1 OPENS
Motor no.1 CLOSES
Motor no.1 CLOSES
Motor no.1 stops. The pedestrian
door is closed. End
Motor no.1 stops by closing limit
switches. The pedestrian door is
closed. End.