Milwaukee M12 PL Notice Originale page 19

4. Keep the PIPELINE LOCATOR vertical, and in line with the push cable, move to the right side slightly. If the bar
graph increases, you are moving toward the rod. If it decreases, you are walking away from it.
Move the locator side to side while looking for maximum response from the bar graph
5. Move toward the push cable until a maximum signal is achieved. It may be necessary to reduce the
sensitivity to keep the bar graph on the scale. This is normal and should be expected. Try to keep the
PIPELINE LOCATOR vertical and avoid swinging it as this may create false readings.
When on top of the push cable the bar graph will be at its peak and the line direction indicator will turn solid
blue with a white line indicating the direction of the push cable
6. Move the locator side to side to ensure a maximum signal is detected. Use the peak level indicator to assist.
ENGLISH 18