Self-Test Function; About Screen; One-Key; Battery Temperature - Milwaukee M12 PL Notice Originale

5.11 Self-test function

The SELF-TEST function confi rms that the locator is operating within its set parameters.
The SELF-TEST should be run in an area free of interference from below ground or above ground utilities
1.
2.  SELF TEST
3.
4. Keep the PIPELINE LOCATOR still while the SELF-TEST is running.
The result will show a PASSED or FAILED screen

5.12 About screen

The ABOUT screen shows the locator's serial number, calibration, and software information. You may be asked to
provide information from this screen when requesting technical support.
1.
2.  ABOUT
3.
4.

5.13 ONE-KEY

Functionalities for One-Key:
- Lock
- Unlock
- Find/blink LED

5.14 Battery Temperature

If the temperature reaches a high of 75º C / 167º F, this message will appear for 5 seconds, followed by the unit
shutting down.
ENGLISH
 SETTINGS
PASSED
 SETTINGS
ABOUT
512 Hz
Software Revision 1.00.001
Software Date 04/27/2020
Software Time 14:28:20.45
Calibration Version
Calibration Date 04/27/2020
Serial Number 103034508400
PCB Identifier
Battery Over Temperature
999
1
FAILED
11