Applying The Transmitter Signal; The Line Trace Locate Screen - Milwaukee M12 PL Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44

7.3 Applying the transmitter signal

In the Milwaukee WIRELESS MONITOR or Milwaukee PIPELINE INSPECTION APP:
- Select LINE TRACE
On the PIPELINE LOCATOR:
- Select a LINE TRACE frequency of 33kHz or 83kHz.
33kHz

7.4 The LINE TRACE Locate Screen

1
2
7
1 Bar graph (mirrors #5 signal strength)
2 Gain setting in dB
3 Active line frequency
4 PIPELINE LOCATOR current mode
5 Signal strength (mirrors #1 bar graph)
The PIPELINE LOCATOR is a peak locator. The antenna confi guration provides a "peak" or maximum signal
response when directly on top of the sonde or push cable. On the PIPELINE LOCATOR display, the signal strength
#5 and bar graph #1 will be at their maximum, or peak.
When at its peak, the last peak indicator, #9 will be left at the peak position, as a reference point before the bar
graph and signal strength decline.
The line direction indicator, #8, will turn from a clear background to solid blue background when in line with the
push cable.
ENGLISH
, press the navigation dial.
FREQUENCIES
512 Hz
640 Hz
33 kHz
33 kHz
83 kHz
50 Hz
60 Hz
RF
3
FREQUENCIES
83kHz
512 Hz
640 Hz
33 kHz
33 kHz
83 kHz
50 Hz
60 Hz
RF
4
LINE TRACE
8
6 Depth of cover
7 Bar graph scale
8 Line direction indicator
9 Last peak indicator
5
9
6
16

Publicité

Table des Matières
loading

Table des Matières