Installing The Spotclip-Plate As Reinforcement For The Ceiling Panel - HellermannTyton SpotClip-Plate Manuel D'utilisation

Installation
5 .3 Installing the SpotClip-Plate as reinforcement for
the ceiling panel
1 Position the SpotClip-Plate on the ceiling panel to be
installed.
Placing the SpotClip-Plate on the panel.
2 Use the SpotClip-Plate as a template to cut the ceiling
panels to size with a saw.
3 Cut the ceiling panel to the desired dimension with a
saw.
Using a saw to cut the ceiling panel to size.
4 Re-insert the ceiling panel and place the SpotClip-Plate
on it.
Placing the SpotClip-Plate on the prepared ceiling panel.
6
Operating instructions • SpotClip-Plate • 09-2017 • 009-50104
5 Insert the light into the ceiling cut-out.
Inserting the light.
6 Install the light in accordance with the operating
instructions.
Installing the light.
; The product is properly installed.