MW TOOLS KT800 Mode D'emploi page 10

KT800-1600-3200 - NLFREN - v1.0 - 03032015
EN
Fig. 3C
To lower a load (or pull a load backward): Pull the handle backward.
Its capacity may be increased by using movable pulley
blocks.
Fig. 4
WARNING!
Never use the wire rope chosen by yourself instead of the old one. If it is done or any accident happens, the consequence
should be answered by the users. When the diameter of the working part of the wire rope has been damaged by 10%, a new
one provided by our factory should be replaced. Never reeve the rope from the head of the hoist or the direction of the hook
must not be used reversely. If it does so work can't be done or accident is easy to happen. While working, the anchored object
should be strong enough so as to support the load to prevent any accident happening.
10