Wear And Storage; Manufacturers And Distributors; Dealers And Addresses - SQlab 611 ERGOWAVE Manuel De L'utilisateur

The originally purchased product automatically becomes the property of SQlab GmbH. SQlab will contact you after a thorough check for
a suitable replacement product.
Claims under the end customer guarantee exist only if:
• The SQlab product has been registered in the SQlab Crash Replacement Programme
(can be found on our website www.sq-lab.com in the service area under crash replacement)
• The purchase can be proven by receipt.
• No changes have been made to the product.
• The intended use was observed.
• The defect of the saddle is not due to improper installation or lack of maintenance.
• Excluded is damage due to wear.
• The supplementary end customer guarantee applies only in Germany
Further claims of the end customer towards SQlab GmbH under this guarantee do not exist.
In the event of a defect or a warranty request, SQlab GmbH is the contact person.

Wear and storage

Bicycles and their components are subject to function-related, mostly usage-dependent wear, such as the abrasion of tyres, grips and
brake pads. Environmental wear results from storage under aggressive environmental conditions, such as solar radiation and the influ-
ence of rain, wind and sand.
Wear is not covered by the warranty.
Note
Note
Store your SQlab ERGOWAVE
conditions:
• Away from direct sunlight.
• Storage at temperatures between -10 ° C and 40 ° C.
• Humidity below 60%.

Manufacturers and distributors

SQlab GmbH, Postweg 4, 82024 Taufkirchen, Germany
Foreign distributors, dealers and addresses
A list of our national and international distributors and dealers can be found on our website:
http://www.sq-lab.com
saddle (mounted or unmounted) under the following
®