Maintenance - Physipro Valdis MC Manuel D'utilisation

Owner's manual
I
nstalling the lateral supports covers
1. Completely unfasten the cover's zipper.
2. Insert cover, starting at the top of the lateral support.
3. With a downward movement, push cover around the lateral support.
4. Fasten the zipper.

MAINTENANCE

Regular cleaning eliminates the accumulation of dirt and grime and helps extend
the life of your backrest. It is recommended to visually inspect the components of
the backrest during the cleaning process.
Cleaning the backrest and lateral support covers
1. Remove cover from backrest and/or lateral supports and fasten the zipper.
2. Machine wash in cold water on the gentle cycle or hand wash with a mild
detergent.
3. Allow to air dry completely.
4. Reinstall cover on the foam padding.
WARNING
Do not iron.
Cleaning the backrest and lateral supports padding
1. Remove backrest cover and the incontinence cover, if necessary.
2. Wipe foam padding lightly with a damp cloth, without soap or detergent.
3. Use a clean dry cloth to gently press on padding to absorb excess
moisture, then let air dry completely.
4. Reinstall cover(s) on the backrest.
WARNINGS
• Do not use soap.
• Do not submerge in water.
• Never machine wash or dry the foam padding.
14